Mark V


 CW Filter





CW filter Doesn't Work in MK-V field

Problem: I have discovered a lacking operating/installing procedure in the English manual. I have bought recently all the filters for my MK-V Field, after installing them and switching them on in the menu, I discovered that the CW filter for the sub receiver did not function.

Solution: The manual states very clearly that you have to set menu 5-8 to 'on' in order to activate the filter, so far the manual is right. What the manual not explains is that to activate the filter you have press 'sub' on the keyboard ant then the NAR1 bandwidth switch. Correct me if I'm wrong, I have read the manual carefully but could not find it in the menu. Wilko Hollemans PA3BWK





Home | RX & Audio | CAT Code | Clarifier | CW Filter | Filters | IF Board | FQY Jump | FQY Off | MD-100 | PWR Supply | RFI | Tuner | TX Hum | MD200

This site was last updated 03/05/08