FT1000MP & MarkV Interfaces |
|
|
|
Using the Yaesu FT-1000MP for SSTV About the only difference in the
FT-1000MP and the FT-1000D as far as SSTV operation is the RF power
output and the AF Out jack The fixed audio output on the MP is on the
Tip of the 1/8 " stereo plug. The output is 200 mv @ 600 ohms. Some of
the soundcard programs like a little higher level audio so I use a 600
ohm CT transformer connecter as an autotransformer to boost the level to
400 mV. Mount the transformer in the center of the box. I use a dab silicone seal to glue the transformer to the box. The resistors are soldered directly to the pot. The patch-in and PTT jacks on back of the 1000MP are RCA phone plugs.
When construction complete go to SETUP
|
This site was last updated 08/21/07